Skip to main content

Universal Fire & Security

Fire Alarm Design & Permitting

Fire Alarm Design and Permitting for
Contractors and Developers.

Fire alarm plans that get rejected cost weeks. We prepare code-compliant fire alarm designs and permit drawings, submit them to the local fire authority, respond to comments, and carry the project through acceptance testing for general contractors, developers, and owners across South Florida.

NFPA 72Compliant Designs
NICETCertified Technicians
PlanReview Support

Design and Permitting Services

Everything reviewers need to approve your fire alarm plans, and everything your project needs after approval.

Fire Alarm System Design

We design each fire alarm system around the building’s occupancy, layout, and local amendments, with the calculations reviewers expect to see.

  • Device layout
  • Panel and power supply sizing
  • Battery calculations
  • Voltage drop calculations

Permit Drawings & Submittals

We prepare permit-ready drawing sets with equipment data sheets, submit them to the fire authority and building department, and handle review comments.

  • Permit-ready drawing sets
  • Equipment data sheets
  • Submittal to the AHJ
  • Response to review comments

Tenant Improvement Design

Tenant improvements need designs that tie into the base building system correctly. We coordinate with the landlord and turn submittals around quickly.

  • Base building tie-in design
  • Landlord coordination
  • Device additions and relocations
  • Fast-turnaround submittals

Voice Evacuation Design

High-rise and large assembly projects need voice evacuation systems designed for coverage and intelligibility from the start.

  • Speaker layout
  • Amplifier sizing
  • Intelligibility planning
  • Fire command center layout

BDA Coordination

Projects that may need in-building radio coverage should plan for it early. We coordinate the BDA design so it doesn’t delay your certificate of occupancy.

  • Early signal surveys
  • Equipment room planning
  • Supervisory interface design
  • Coverage testing for occupancy

Acceptance Testing Support

We pre-test the system before the fire inspector arrives, lead the acceptance testing, and close out punch list items.

  • Pre-test verification
  • AHJ acceptance test
  • Punch list correction
  • As-built documentation

Have drawings that came back with comments? Send them over and we will help get them approved.

Why Fire Alarm Plans Get Rejected

These are the most common reasons fire alarm submittals come back with comments.

01

Missing Calculations

Reviewers expect battery and voltage drop calculations, and notification coverage that matches the layout. Missing or incomplete calculations are a common reason for rejection.

02

Equipment Without Approvals

Listed and compatible equipment has to be documented, and in Miami-Dade and Broward, exterior equipment also needs HVHZ product approvals.

03

Local Amendments Overlooked

Each jurisdiction applies the Florida codes with its own expectations. Broward projects, for example, also follow amendments administered by the Board of Rules and Appeals.

04

Incomplete Interface Details

Elevator recall, HVAC shutdown, door releases, and sprinkler supervision all need to be shown clearly on the drawings.

05

Tenant Work That Ignores the Base System

Tenant improvement drawings that don’t account for the existing building system get sent back or cause trouble at acceptance testing.

06

Radio Coverage Not Addressed

Buildings that will need a BDA should plan for it in the design, not discover it during final inspection.

Starting a new project? Bring us in during design development.

Design and Permitting Across South Florida

We design and permit fire alarm systems throughout Miami-Dade, Broward, and Palm Beach counties. Find your city below.

Don’t see your city? We serve all of South Florida. See our county pages for Miami-Dade, Broward, and Palm Beach.

How Our Design Process Works

From the first drawing review to the final acceptance test, here’s how we move your project forward.

Step 01

Review the Project

We review architectural drawings, occupancy, and the jurisdiction’s requirements.

Step 02

Design & Calculate

We lay out the system and complete the calculations and documentation reviewers need.

Step 03

Submit & Respond

We submit the permit package and respond to review comments until it’s approved.

Step 04

Install & Accept

We install the system, or support your installer, and lead the acceptance test with the fire inspector.

Why Contractors Choose Universal

Clear scopes, fast answers on review comments, and one team from design through acceptance.

Built for Contractors

We work the way GCs and developers need, with clear scopes, fast responses to comments, and coordination with every trade.

NICET-Certified Technicians

Every design, installation, and inspection is handled by technicians who hold NICET certification in fire alarm systems, the industry’s highest field credential.

Licensed Florida Fire Alarm Contractor

We hold Florida licenses EC-13010477 and EF-20001077, so your building has a properly licensed, documented contractor of record.

Complete Documentation Every Visit

Every inspection and service call ends with a written report you can hand to the fire inspector, your insurance carrier, or your board.

South Florida Based

Our office is on NW 56th Street in Miami, and our technicians work across Miami-Dade, Broward, and Palm Beach counties every week.

Certified, Licensed & Trusted

NICET
NICET CertifiedNational Institute for Certification in Engineering Technologies
FASA
FASA CertifiedFlorida Automatic Fire Alarm Association certified contractor
BASA
BASA CertifiedBurglar & Fire Alarm Association, licensed Florida alarm contractor
ETL
ETL Partner #EF20001077Licensed ETL Partner for fire alarm installation and service

Design and Permitting Questions

What general contractors, developers, and owners ask us most.

Both. Most clients have us design, permit, and install the system. We can also provide design and permitting on its own when needed.

It varies by jurisdiction and workload. A complete, well-documented submittal moves faster and avoids extra review cycles.

Yes. Send us the comments and drawings, and we’ll revise the design and resubmit.

Yes. We coordinate pathways, power, and interfaces with the electrical contractor and other trades.

Yes. We design voice evacuation and coordinate BDA systems so they’re integrated with the fire alarm from the start.

We work throughout Miami-Dade, Broward, and Palm Beach counties, including cities with their own fire prevention bureaus.

Get Your Fire Alarm Plans Approved.

Send us your drawings and project details. We’ll review the scope and give you a clear proposal for design, permitting, and installation.

  • Permit-ready drawings and calculations
  • Submittal and review comment response
  • Acceptance testing support
  • Serving Miami-Dade, Broward and Palm Beach

Send Us a Message